User manual

1918
Board type Character Oak Rustic Oak Nature Oak Select Oak
Technical
Width 110mm
128, 168, 208mm
or random widths
128, 168, 208mm
or random widths
128, 168, 208mm
or random widths
Thickness 18mm 21mm 21mm 21mm
Length range
Random
300-1500mm
Random
1160-2360mm
Random
1160-2360mm
Random
1160-2360mm
Finish Presealed
Presealed or
Unsealed/Brushed
Presealed or
Unsealed/Brushed
Presealed or
Unsealed/Brushed
Tongue and groove
   
Micro bevelled
edge - sides and ends
   
End matched
   
Filled knots
   
Length and width
of filled knots
Up to 40mm Up to 40mm Up to 30mm

Unfilled knots
   
Size of unfilled knots Pin head Pin head Pin head Pin head
Visable sapwood
   
Sapwood max. size
Up to 25%
of the board
Up to 25%
of the board
Up to 15%
of the board
Minimal
Shakes
   
Shakes detail Occasional Occasional Occasional Occasional
On site acclimatisation Min. 48 hours Min. 48 hours Min. 48 hours Min. 48 hours
Subfloor
With DPM
and 24mm
batons or
plywood
Fully
bonded
With DPM
and 24mm
batons or
plywood
Fully
bonded
With DPM
and 24mm
batons or
plywood
Fully
bonded
With DPM
and 24mm
batons or
plywood
Fully
bonded
Smooth level concrete
       
Total increase
in floor height
42mm 20mm 45mm 23mm 45mm 23mm 45mm 23mm
Smooth level
floorboards/laid at
90 degrees to existing
       
Total increase
in floor height
18mm n/a 21mm n/a 21mm n/a 21mm n/a
Joists
       
Total increase
in floor height
0mm n/a 0mm n/a 0mm n/a 0mm n/a
Fixing Method
Secret Nail
   
Glue end tongue to
groove: Floating floor

128mm Clip
system only
128mm Clip
system only
128mm Clip
system only
Fully bonded
   
Clip system

With 128mm
wide board only
With 128mm
wide board only
With 128mm
wide board only
Classic Oak Flooring - Solid board Classic Oak Flooring - Engineered board
Board type Rustic Oak Nature Oak Select Oak
Technical
Width 180mm 180mm 180mm
Thickness 20mm 20mm 20mm
Length range From 1200-2400mm From 1200-2400mm From 1200-2400mm
Finish
Presealed or
Unsealed/Brushed
Presealed or
Unsealed/Brushed
Presealed or
Unsealed/Brushed
Tongue and groove
  
Micro bevelled
edge - sides and ends
  
End matched
  
Filled knots
  
Length and width
of filled knots
Up to 40mm Up to 30mm

Unfilled knots
  
Size of unfilled knots Pin head Pin head Pin head
Visable sapwood
  
Sapwood max. size
Up to 25%
of the board
Up to 15%
of the board
Minimal
Shakes
  
Shakes detail Occasional Occasional Occasional
On site acclimatisation Min. 24 hours Min. 24 hours Min. 24 hours
Subfloor
Smooth level concrete
  
Total increase
in floor height
23mm
inc. 3mm underlay
23mm
inc. 3mm underlay
23mm
inc. 3mm underlay
Smooth level
floorboards/laid at
90 degrees to existing
  
Total increase
in floor height
23mm
inc. 3mm underlay
23mm
inc. 3mm underlay
23mm
inc. 3mm underlay
Joists
  
Total increase
in floor height
n/a n/a n/a
Fixing Method
Secret Nail
  
Glue end tongues to
grooves: Floating floor
  
Fully bonded
With underfloor heating
only, refer to guide
With underfloor heating
only, refer to guide
With underfloor heating
only, refer to guide
Clip system
  