User Manual

32
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Anti-Burn-In Mode: Selects the “Anti-Burn-In” mode:
• A - Executes fast.
• B - Slower but more precise than mode
A.
• C - Slowest but the most precise
Anti-Burn-in
TM
mode.
Press the or button
to select the setting.
A
B
C
Alink Synchronizes powering on/off via HDMI.
Note: This menu option is only available if
the input source is HDMI.
On
Off
Power Saving Enables or disables power saving mode.
When the LCD display turns into power
saving mode, the screen turns black and the
LED indicator lights amber.
Note: The amount of time for the display to
enter power saving varies depending on the
Source Detect setting. If the Source Detect
is set to Auto, the display checks all input
source signals before entering power saving
mode if no signal is detected; this takes up
more time. If the Source Detect is set to
Manual, the display enters power saving
mode right away.
Source Detect Sets the display to automatically or manually
detect the input source signal.
Auto
Manual
Blue Screen Enables or disables the blue screen feature.
If the setting is set to On, it displays a blue
screen when no signal is available.
On
Off
Signal Info Enables or disables the signal information to
be displayed on the screen.
Logo Enables or disables the logo feature. If the
setting is set to On, the AG Neovo logo is
briey displayed after the display is powered
on.
LED Turns the LED indicator on or off while using
the LCD monitor.
OSD
Transparency
Sets the transparency of the OSD menu.
Press the or button
to adjust the value.
0 to 100
OSD Timer Sets the length of time (in seconds) the OSD
screen is displayed. When the time elapses,
the OSD screen is automatically inactivated