SC-19E, SC-22E, SC-24E & SC-27E LED-Backlit Display User Manual
TABLE OF CONTENTS Contents Federal Communications Commission (FCC) Notice (U.S. Only)................................................................. 1 WEEE............................................................................................................................................................ 2 Notice............................................................................................................................................................ 3 Cautions When Setting Up.......
TABLE OF CONTENTS CHAPTER 6: APPENDIX 6.1 Warning Messages................................................................................................................................ 34 6.2 Troubleshooting..................................................................................................................................... 35 6.3 Transporting the LCD Display...............................................................................................................
SAFETY INFORMATION Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAFETY INFORMATION WEEE Information for users applicable in European Union countries. The symbol on the product or its packaging signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources. Each country in the European Union should have its collection centers for electrical and electronic equipment recycling.
PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symbols used in this manual This icon indicates the existence of a potential hazard that could result in personal injury or damage to the product. This icon indicates important operating and servicing information. Notice • Read this User Manual carefully before using the LCD display and keep it for future reference. • The product specifications and other information provided in this User Manual are for reference only.
PRECAUTIONS Cautions When Using Use only the power cord supplied with the LCD display. The power outlet should be installed near the LCD display and be easily accessible. If an extension cord is used with the LCD display, ensure that the total current consumption plugged into the power outlet does not exceed the ampere rating. Do not allow anything to rest on the power cord. Do not place the LCD display where the power cord may be stepped on.
PRECAUTIONS Notice for the LCD Display In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease with time. When static images are displayed for long periods of time, the image may cause an imprint on the LCD display. This is called image retention or burn-in.
Chapter 1: Product Description CHAPTER 1: PRODUCT DESCRIPTION 1.1 Package Contents When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer.
PRODUCT DESCRIPTION 1.2 Installation 1.2.1 Installing the Stand 1. Place the LCD display with the screen side down on a cushioned surface. 2. Attach the base to the stand. -SC-19E/22E/24E models: Press firmly on the base to secure the latches on the base into the slots on the stand. -SC-27E model: Attach the base to the stand and fix with the screw to join them tightly. 3. Attach the stand to the display.
PRODUCT DESCRIPTION 1.2.2 Adjusting the Viewing Angle For optimal viewing, it is recommended to look at the full face of the screen, then adjust the screen of the LCD display angle according to your preference. Hold the stand so that the screen does not topple when you make the adjustment. You are able to adjust the screen angle as illustrated below: 23°~-5° 1.2.3 Wall Mounting To wall mount the LCD display, do the following steps: 1. Remove the stand. Please refer to page 36.
PRODUCT DESCRIPTION 2. Wall mount the LCD display. Screw the mounting bracket to the VESA holes at the rear of the LCD display.
PRODUCT DESCRIPTION 1.3 Control Buttons 1 2 HDMI D-SUB CVBS CVBS AUDIO AUDIO IN OUT IN OUT 3 4 5 6 1 [ ] Source/Exit 4 • During OSD menu, confirm the selection or enter a submenu. • Press and hold the button to mute/ unmute audio. Refer to page 20. • Press and the hold the button to freeze/unfreeze the screen. Refer to page 18. 5 • During OSD menu, close the OSD menu or exit a submenu. 6 ] Up • Call out the Volume quick menu. Then press the / button to adjust the volume level.
PRODUCT DESCRIPTION 1.4 Overview 1.4.1 Front View 1 1 2 2 SC-19E SC-22E 1 1 2 2 SC-24E 1 Display screen 2 Control buttons SC-27E Press the button to perform its function. For more information about each button, refer to page 10.
PRODUCT DESCRIPTION 1.4.2 Rear View HDMI D-SUB CVBS IN CVBS OUT HDMI AUDIO AUDIO IN OUT D-SUB CVBS CVBS AUDIO AUDIO OUT IN OUT IN 9 9 SC-19E SC-22E HDMI HDMI D-SUB D-SUB CVBS CVBS AUDIO AUDIO IN OUT IN OUT CVBS CVBS AUDIO AUDIO IN OUT OUT IN 9 9 SC-24E 1 1 SC-27E HDMI D-SUB 2 3 CVBS CVBS AUDIO AUDIO IN OUT IN OUT AC Power input 4 5 6 AUDIO IN connector Use to connect the power cord. 2 3 4 7 8 Use to connect an audio cable for audio input.
Chapter 2: Making Connections CHAPTER 2: MAKING CONNECTIONS CAUTION: Make sure that the LCD display is not connected to the power outlet before making any connections. Connecting cables while the power is ON may cause possible electric shock or personal injury. 2.1 Connecting the AC Power 1. Connect the power cord to the AC power input at the rear of the LCD display. 2. Connect the power cord plug to a power outlet or a power supply.
MAKING CONNECTIONS 2.2 Connecting Input Source Signals Input source signals can be connected with either of the following cables: • VGA HDMI Connect one end of a D-SUB (VGA) cable to the D-SUB D-SUB (VGA) connector of the LCD display and the other end to the D-SUB (VGA) connector of the computer. • HDMI Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI connector of the computer.
MAKING CONNECTIONS 2.2.1 Connecting an Audio Device 1. Connect one end of an audio cable to the AUDIO IN connector at the rear of the LCD display. 2. Connect the other end of an audio cable to the AUDIO OUT connector of the computer.
MAKING CONNECTIONS 2.3 Connecting a Video Device 1. Connect one end of a composite cable to the CVBS IN connector at the rear of the LCD display. 2. Connect the other end of a composite cable to the CVBS OUT connector of your device. CVBS IN CVBS OUT CVBS OUT Video Player 2.4 Connecting a USB Storage Device (for firmware upgrade) Connect a USB storage device to the USB port of the LCD display for firmware upgrade.
MAKING CONNECTIONS 2.5 Connecting an External Audio Device 1. Connect one end of an audio cable to the AUDIO OUT connector at the rear of the LCD display. 2. Connect the other end of an audio cable to the AUDIO IN connector of the external audio device.
Chapter 3: Using the LCD Display CHAPTER 3: USING THE LCD DISPLAY 3.1 Turning on the Power 1. Plug the power cord to a power outlet or power supply. 2. Press the button to turn the LCD display on. Power button When the LCD display is turned on, press the button to turn off the LCD display. Note: The LCD display still consumes power as long as the power cord is connected to the power outlet. Disconnect the power cord to completely cut off power. 3.
USING THE LCD DISPLAY Press and hold the button for 3 seconds again to deactivate screen freeze the screen freeze message is displayed on the screen. SC R E E N FR E E ZE : O FF The screen image displays the elapsed real-time playback image when screen freeze is deactivated. 3.3 Adjusting the Volume 1. Press the or button to call out the Volume quick menu. Up/Down buttons 51 2. Press the or button to adjust the volume.
USING THE LCD DISPLAY 3.4 Muting Audio Press and hold the button for 3 seconds to mute audio, the audio mute message is displayed on the screen. Menu button MU TE . Press and hold the button for 3 seconds again to unmute. Note: You can also disable the mute function by pressing the and buttons simultaneously. 3.5 Locking the Control Buttons There are two options to lock the control buttons: lock all the buttons or lock all but Power button.
USING THE LCD DISPLAY To unlock the control buttons, press and hold the + buttons for 3 seconds again, the key unlock message is displayed on the screen. Key Lock OFF • To lock all the control buttons except for the Power button, press and hold the + buttons for 3 seconds, the key lock message is displayed on the screen. DOWN+MENU buttons Key Lock ON To unlock the control buttons, press and hold the + buttons for 3 seconds again, the key unlock message is displayed on the screen.
Chapter 4: On Screen Display Menu CHAPTER 4: ON SCREEN DISPLAY MENU 4.1 Using the OSD Menu 1. Press the button to call out the OSD window. Main menu I MAGE SETTI NG P IC TU RE MO DE CO NTRAST BRIGHTNESS S ATU R ATI ON TIN T S HARP NESS CO LO UR TEMP. AS P E CT RATI O P C S E T TI NG N O IS E REDUCTI ON G AM M A Menu options 2. Press the or CCTV 85 48 48 50 60 Submenu HI G H 2. 0 button to select a menu and press the button to enter the selected menu.
ON SCREEN DISPLAY MENU 4.2 OSD Menu Tree Main Menu Image Settings ( Submenu Reference ) Picture Mode Standard CCTV Video Contrast Brightness Saturation Tint Sharpness Colour Temp. Cool Neutral Warm User Aspect Ratio (Full, Native, Real, H. Zoom Zoom) V. Zoom Overscan PC Setting Auto adjust H. Position V. Position Phase Clock Noise Reduction Off Low Mid High Gamma 1.8 2.0 2.2 2.4 S Backlight Black Level DCR On Off 23 Refer to pages 26-29.
ON SCREEN DISPLAY MENU Main Menu Submenu Reference ) Color Range Image Settings ( Auto Refer to pages 26-29. Full Limit Audio Setting ( ) Volume Refer to page 30. Mute On Off Source PC Video System ( ) Language English Français Deutsch Italiano Español Nederlands Română Česky Polski Русский 简中 繁中 Recall F/W Update Information Input Select: Resolution: Horizontal Freq.: Vertical Freq.
ON SCREEN DISPLAY MENU Main Menu System ( Submenu Reference Power Saving ) On Refer to pages 31-32. Off Source Detect Auto Manual Blue Screen On Off Signal Info On Off Logo On Off LED On Off OSD Transparency OSD Timer Input Select ( VGA ) Refer to page 33. HDMI CVBS Note: Availability of some menu items depend on the input source signal and current setting. If the menu is not available, it is disabled and grayed out.
Chapter 5: Adjusting the LCD Display CHAPTER 5: ADJUSTING THE LCD DISPLAY 5.1 Image Setting 1. Press the button to call out the OSD window. 2. Press the or button to select and press the button to enter the Image Setting menu. IMAGE SETTING P I C TURE MODE C ON TRAST B R I G HTNESS S ATURATION TI N T S H A RPNESS C OLO UR TEM P. A S P ECT RATIO P C SETTING NOI SE REDUCTI ON GA M M A 3.
ADJUSTING THE LCD DISPLAY Item Tint Sharpness Function Operation Range Adjusts the colour tint. Press the Note: This menu option is only available if the input source is CVBS or HDMI. to adjust the value. or button 0 to 100 Adjust the clarity and focus of the screen image. Note: This menu option is only available if the input source is CVBS or HDMI. Colour Temp. (Colour Temperature) Provides several colour adjustment Press the settings. to select the setting.
ADJUSTING THE LCD DISPLAY Item Aspect Ratio Function Operation Range Adjusts the aspect ratio of the screen Press the image. to select the setting. • or button Full Native Real Zoom If the Aspect Ratio setting is set to Zoom, you can customize the aspect ratio by adjusting the horizontal zoom (H. Zoom) and/or vertical zoom (V. Zoom) according to your preference. A SPEC T R AT IO A SPEC T R AT IO H. ZOOM V. Z O O M O VER SC A N a. Select Zoom and press the b. Press the or Then press the c.
ADJUSTING THE LCD DISPLAY Item Noise Reduction Function Operation Range Adjusts the noise reduction to help remove Press the or button noise from images. This helps produce to select the setting. clearer and crisper images. Note: This menu option is only available if the input source is CVBS or HDMI. Noise Reduction On Noise Reduction Off Gamma Backlight Black Level Off Low Mid High Adjusts the non-linear setting for picture Press the luminance and contrast. to select the setting.
ADJUSTING THE LCD DISPLAY 5.2 Audio Setting 1. Press the button to call out the Audio Setting menu. 2. Press the or button to select and press the button to enter the Audio Setting menu. AUDIO SETTING V OLUM E M U TE S OU RCE 3. Press the OFF VIDEO or VO L U ME MU T E SO U R C E button to select an option and press the Item Volume A U D IO SET T IN G 50 Function Adjusts the volume level of the built-in 50 button to enter its submenu. Operation speaker.
ADJUSTING THE LCD DISPLAY 5.3 System 1. Press the button to call out the OSD window. 2. Press the or button to select and press the button to enter the System menu. SYSTEM LA N GUAGE R E C ALL F/ W U PDATE I N FORM ATION A N TI -BURN-IN Al i nk P OW ER SAVI NG S OU R CE DETECT B LU E SCREEN S I GNAL INFO LOGO 3.
ADJUSTING THE LCD DISPLAY Item Anti-Burn-In Function Operation Range Mode: Selects the “Anti-Burn-In” mode: Press the • A - Executes fast. to select the setting. • B - Slower but more precise than mode or button A B C A. • C - Slowest but the most precise Anti-Burn-inTM mode. Alink Synchronizes powering on/off via HDMI. On Off Note: This menu option is only available if the input source is HDMI. Power Saving Enables or disables power saving mode.
ADJUSTING THE LCD DISPLAY 5.4 Input Select 1. Press the button to call out the OSD window. 2. Press the or button to select and press the button to enter the Input Select menu. I NPUT SELECT IN PU T SEL EC T V GA HDMI CVBS 3. Press the VG A H D MI C VB S or button to select an input source and press the source. Item Function VGA Sets VGA as the input source signal. HDMI Sets HDMI as the input source signal. CVBS Sets CVBS as the input source signal.
Chapter 6: Appendix CHAPTER 6: APPENDIX 6.1 Warning Messages When any of these warning messages appear, check the following items. Warning Message Cause The resolution or the refresh Unsupported √√ Change the resolution or the rate of the graphics card of refresh rate of the graphics the computer is set too high. card. The LCD display cannot NO SIGNAL Solution detect the input source signal. √√ Check if the input source is turned ON. √√ Check if the signal cable is properly connected.
APPENDIX 6.2 Troubleshooting Problems No picture. • LED indicator is OFF. • LED indicator is amber. Possible Cause and Solution • Check if the LCD display is turned ON. • Check if the power cord is plugged into the power outlet. • Check if the computer is turned ON. • Check if the computer is in standby mode, move the mouse or press any key to wake up the computer. Image position is incorrect. • For VGA input, adjust the H. Position and V.
APPENDIX 6.3 Transporting the LCD Display To transport the LCD display for repair or shipment, place the display in its original packaging box. Note: • When repacking, carefully place the LCD display in its box and protect the screen surface from touching any object. 1. Remove the stand. a. Place the LCD display with the screen side down on a cushioned surface. b. Press down on the release latch to unlock the stand and then slide the stand out of the recess on the display.
APPENDIX 2. Detach the base from the stand. -SC-19E/22E/24E models: Pinch the latches to unlock the base and then remove the base from the stand. -SC-27E model: Unscrew the base and then remove the base from the stand. SC-19E/22E/24E SC-27E 3. Put the LCD display inside its original plastic. Then place the LCD display with the screen side down on the foam cushion. 4. Put all other contents on their designated area (if necessary). 5. Close and tape the box.
Chapter 7: Specifications CHAPTER 7: SPECIFICATIONS 7.1 Display Specifications SC-19E Panel SC-22E SC-24E SC-27E Panel Type LED-Backlit TFT LCD (TN Technology) LED-Backlit TFT LCD (TN Technology) LED-Backlit TFT LCD (IPS Technology) LED-Backlit TFT LCD (VA Technology) Panel Size 18.5 21.5 23.8 27.0 Max. Resolution 1366 x 768 FHD 1920 x 1080 FHD 1920 x 1080 FHD 1920 x 1080 Pixel Pitch 0.300 mm 0.248 mm 0.275 mm 0.
SPECIFICATIONS 7.2 Display Dimensions 19.9 48.3 SC-19E 441.9(outline dimension) 411.3(opening dimension) 15.3 15.3 170.95 100 170.95 194.0 220.95 220.95 76.8 60.5 1.6 100 91.5 86.4 73 135.9 356.2 134.8 132.4 232.0(opening dimension) M4x10L 20 268.3(outline dimension) 16.3 23° ~-5° 413.4 14.25 14.25 Ø194.0 22.1 48.3 SC-22E 505.2(outline dimension) 202.6 13.8 202.6 100 M4x10L 155 D-SUB IN OUT AUDIO AUDIO IN OUT 74.3 87.1 106 HDMI 1.6 252.6 100 380.8 134.
SPECIFICATIONS 540.6 (outline dimension) 535 (opening dimension) Detail A 2:1 2.8 105 86 100 D-SUB IN OUT AUDIOAUDIO IN OUT 73.5 98.6 HDMI 117.6 396.1 137.9 155 167.6 18.3 322.6(outline dimension) 301.5(opening dimension) 220.3 100 220.3 2.8 2.8 49.6(bottom bezel & rear cover) 19.7 Detail A 23°~-5° 46.9(top bezel & rear cover) 49.6 SC-24E 270.3 270.3 494.6 23 0 4. 19 Ø 23 194 Detail A 2:1 256 2.8 256 M4x10L 125.
