Specifications

Interface Frequency

The following frequency range is the working period. If the entered mode between below period

but not match the frequency of supported timing, display optimization not be assured. If the

entered mode is out of the working period, the display will be blanking (just show “out of range”)

then go to power saving.

Basically, mode judgment is regardless the sync polarity except both or more modes that are all

belong to the supported timing list and could be judged by sync polarity only.

At the meantime, real entered frequency of the supported timing is not requested exactly.

Normalization of VGA card’s deviation will be acceptable.

• Horizontal Frequency 30 KHz---80 KHz

• Vertical Frequency 50 Hz---75 Hz