Specifications

Troubleshooting

This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing

differences among various VGA cards in the market, users may initially experience an unstable or

unclear display whenever a new display mode or new VGA card is selected.

Attention

This LCD Monitor Supports Multiple VGA Modes.

Refer to the Standard Timing for a listing of modes supported by this LCD Monitor.

Problem Check Items

Picture is unclear and unstable The picture is unclear and unstable, please perform the

following steps:

1. Enter PC to “Shut Down Windows” status while you’re

in MS-Windows environment.

2. Check the screen to see if there’s any black vertical

stripes appear. If there are, take advantage of the

“Clock”function in OSD menu and adjust (by increment or

decrement numbers) until those bars disappear.

3. Move to “Phase” function in OSD menu again and

adjust the monitor screen to its most clear display.

4. Click “No” on “Shut Down Windows” and back to the

normal PC operating environment.

5. When the input display mode is not 1280 × 1024, the

image is smoothly expanded to1280 × 1024 dots with

scaling engine. After expansion from 650×350, 640 ×

400,640 × 480, 720×400,832×624,800×600, and 1024×768

resolution, the text may look not so sharp, and the Graphics

may look not so proportional.

There is no picture on LCD Monitor If there’s no picture on the LCD Monitor, please perform the

following steps:

1. Make sure the power indicator on the LCD Monitor is

ON, all connections are secured, and the system is running

on the correct timing. Refer to “Supported Timing List” for

information on timing.

2. Turn off the LCD Monitor and then turn it back on

again. If there is still no picture, press the Adjustment

Control button several times.

3. If step 2 doesn’t work, connect your PC system to