Specifications

1. Please turn off PC power.

2. To connect the signal cable to the VGA or DVI port on your PC. Make sure connection is

secure.

3. To connect the DC 12V plug of the power adapter to the Monitor DC 12V socket.

4. Connect the other plug of the power adapter to a power source.

5. Connect one end of the audio extension line to the interface of the Audio In, and another

end is connected to the PC Sound Card’s Audio Out jack.

6. Connect one end of the USB extension line to the USB Port, and another end is

connected to the USB Port on the back of the computer (which usually lies near the

keyboard port).

7. Turn on the computer.

8. Press the soft power switch on the monitor.

9. The display should appear. If no display appears, check Troubleshooting in the following

part of the manual.

10. Ensure that your computer display is set at 1280×1024 pixels and 60Hz. Press the AUTO

button exceeds 1 second. The monitor optimizes the display automatically.