User manual

page 19 of 27 Report No. 55S072147/NCH/CZ
IEC 601 + Am. 1& 2
Clause Requirement + Test Result - Remark Verdict
TRF No. I6011__C TRF originator: UL
Detachable indicating devices are prevented from
incorrect connection without the use of tool
N
56.10c Stops are provided on rotating controls: N
- to prevent an unexpected change from
maximum to minimum or vice versa where this
could produce a safety hazard
No such device. N
- to prevent damage to wiring N
56.11 Cord-connected hand-held and foot-operated control devices N
a) Contain voltages not exceeding 25 V a.c. or 60
V d.c. and isolated from the mains part by Cl. 17g
No cord-connected hand-held
or foot-operated control
device.
N
b) Hand-held control devices comply with the
requirement and test of Sub-clause 21.5
N
- Foot-operated control devices designed to
support the weight of an adult human being
N
c) Devices not change their setting when
inadvertently placed
N
d) Foot-operated control devices are at least
IPX 1
N
- For surgical use, electrical switching parts are
IPX 8
N
e) Adequate strain relief at the cord entry provided N