User manual

page 8 of 27 Report No. 55S072147/NCH/CZ
IEC 601 + Am. 1& 2
Clause Requirement + Test Result - Remark Verdict
TRF No. I6011__C TRF originator: UL
- Markings comply with IEC 445 See below. P
k) For permanently connected devices the supply
connections are clearly marked adjacent to the
terminals (or in accompanying documents for small
equipment)
Not permanently connected
equipment.
N
l) Statement for suitable wiring materials at
temperatures over 75 °C
Not permanently connected
equipment.
N
n) Capacitors and/or circuit parts marked as
required in Sub-clause 15c
No such devices. N
6.3 Marking of controls and instruments P
a) Mains switch clearly identified See below. P
- ON and OFF positions marked according to
Symbols 15 and 16 of table D1 or indicated by an
adjacent indicator light
The line “I” for “ON”and circle
“O” for OFF were provided
according to IEC 60417-1-IEC-
5007 and 60417-1-IEC-5008.
P
b) Indication of different positions of control
devices and switches
Indication of control devices
were provided on the
equipment.
P
c) Indication of the direction in which the magnitude
of the function changes, or an indicating device
N
f) The functions of operator controls and indicators
are identified
Provided in the user manual. P
g) Numeric indications of parameters are in SI
units except for units listed in Am. 2
Provided in SI units. P
6.4 Symbols P
Used symbols comply with Appendix D or IEC 417
and/or IEC 878 or ISO publications (if applicable)
The line “I” for “ON”and circle
“O” for OFF for mains switch
were provided according to
IEC 60417-1-IEC-5007 and
60417-1-IEC-5008.
P
6.5 Colors of the insulation of conductors P
a) Protective earth conductor has green/yellow
insulation
The protective earth conductor
is green/yellow color
insulation.
P
b) All insulations of internal protective earth
conductors are green/yellow at least at their
terminations
P
c) Only protective or functional earthing, or potential
equalization conductors are green/yellow
P
d) Color of neutral conductor .................................... : Not provided with the power
supply cord.
N
e) Colors of phase conductor(s) .............................. : Not provided with the power
supply cord.
N