User guide

Steering Components
Operator’s Manual 75
The following are the controls available on the Actuator screen:
•
Hard Left – Pressing this button tells the MDU to turn to the right at 100% speed.
•
xx% Left – The xx represents the Steering Left/Right Percentage that the slider bar has been set to. Pressing this button
will turn the MDU to the right at xx% speed.
•
0% – The MDU will not rotate.
•
% Right – The xx represents the Steering Left/Right Percentage that the slider bar has been set to. Pressing this button
will turn the MDU to the left at xx% speed.
•
Hard Right – Pressing this button tells the MDU to turn to the left at 100% speed.
•
Stop – Pressing this button stops all commands to the MDU.
•
Steering Left/Right Percentage – This slider controls the change percentage for the xx% Left and xx% Right buttons.
Changing these values allows the user to test how the MDU reacts at different loads.
•
Minus (-) and Plus (+) Buttons – Pressing these buttons adjusts the Steering Left/Right Percentage Slider Bar.