Getting Started Guide Instruction Manual

EZ-Guide Plus Lightbar Guidance System Getting Started Guide Using GPS 47
To configure the system for use with EGNOS:
1. Select GPS / Corrections. The EZ-Guide Plus screen
appears.
2. Select Edit and then press
o.
The Edit screen appears.
3. Select Edit EGNOS and then press
o.
The EGNOS screen appears.
4. Select the appropriate setting for each satellite. See
the table on page 46.
The default EGNOS settings are:
XP/HP options
If you have a high accuracy smart antenna and are using
XP/HP corrections, you can enable the following options:
• Autoseed™ fast restart technology - enables faster
XP/HP convergence if the vehicle has not moved since
power was turned off
• VBS Backup - enables the use of VBS corrections if
XP/HP corrections are lost
Subscriptions
The OmniSTAR corrections (VBS, HP, and XP) are
subscription services, which are automatically configured.
To view your subscription information, select GPS /
Subscription.
Satellite Default Description
AOR-E Heed Hlth Operational
IOR Off Test signal
IOR-W Heed Hlth Operational
ARTEMIS Off Test signal