Getting Started Guide Instruction Manual

46 Using GPS EZ-Guide Plus Lightbar Guidance System Getting Started Guide
You can select from four levels of satellite reception:
Editing WAAS
To configure the WAAS satellite:
1. Select GPS / Corrections. The EZ-Guide Plus screen
appears.
2. Select Edit and then press
o.
The Edit screen appears.
3. Select Edit WAAS and then press
o.
The WAAS screen appears.
4. Select the appropriate WAAS setting for each satellite
from the table on page 46.
Editing EGNOS
The EZ-Guide Plus system can use the European EGNOS system.
Setting Description
On The system searches for the satellite, regardless of the region or the
satellite health.
IgnoreHlth The system searches for the satellite if the satellite is within the
appropriate region, regardless of satellite health.
HeedHlth The system searches for the satellite if the satellite is within the
appropriate region and is healthy.
Off The system does not search for the satellite.
Satellite Default
PRN-122 Heed Hlth
POR Heed Hlth
PRN-135 Heed Hlth
PRN-138 Heed Hlth