Getting Started Guide Instruction Manual

EZ-Guide Plus Lightbar Guidance System Getting Started Guide Getting Guidance 33
Deleting all AB Lines
1. Select 9 to enter the Guidance Pattern screen.
2. Select Delete All AB’s. The Warning screen appears.
3. Select Yes to delete all AB Lines. The Guidance
Pattern screen appears.
4. Select a new field pattern to create and then press
o.
5. Set the swath width and implement width.
6. Select Exit and then press
o.
The main screen appears.
Nudge
Nudging moves the guidance line back to the correct path. Nudge a guidance line if
you need to correct for:
• GPS position drift when returning to the field for guidance, for example after
pausing or turning the unit off and on
• GPS satellite constellation changes while driving in the field
Nudge is always applied to the guidance line relative to the vehicle heading. To nudge,
select
1 or 3 from the action icons.
The default nudge increment value is 0.02 m (0' 1"). To change the amount by which
nudge increases:
1. Select Guidance / Nudge Increment. The Nudge
Increment screen appears.
2. Press
u or D to select the required nudge increment
and then press
o.
On the ground – Vehicle on On screen – Vehicle offline.
line with current swath/row.
Nudge left to correct.