Getting Started Guide Instruction Manual

18 Getting Started EZ-Guide Plus Lightbar Guidance System Getting Started Guide
Setting the units and language
By default, the units are set to US and the language is set to English. To change:
• the units to metric, select Lightbar / Units
• the language to Portuguese, Spanish, French, German, or Italian, select
Lightbar / Language
Changing the display orientation
Generally, mount the lightbar with the LEDs above
the screen (upright). If you mount the lightbar with
the LEDs below the screen (inverted), select
Lightbar / Lightbar Mount and change the setting.
Configuring the display
Select Lightbar / Display Config to enable or disable any
of the following items displayed on the plan and
perspective maps. Set:
• Progress Lines to On to give a sense of perspective
and speed.
• Adjacent Swaths to On to display one swath either
side of the current swath.
• Field Boundary to On if the field is a Headland.
• AB Line to On to display the AB Line.
• Path Display to the relevant option to display the path driven. See
Path Display on
the Summary screen, page 19
.
You can also use this screen to change the View option:
• Auto: The view automatically changes between plan and perspective views in
headlands
• Fixed: The view remains fixed
Path Display on the Map and 3D screen
By default, the path you have driven is always displayed
on screen as a dotted line.
Upright
Inverted