Getting Started Guide Instruction Manual

16 Getting Started EZ-Guide Plus Lightbar Guidance System Getting Started Guide
Zooming
To enter zoom mode, select 5, or press z on the
remote control. The zoom screen appears.
• To change the zoom scale, press
u or D.
• To accept the zoom scale and return to the map
view, press
o, or press z on the remote control.
Zooming in the Summary view
In the Summary view, there are additional zoom
features. To access the additional features, when you are
in the Summary view press
5. A different set of action
icons appears:
Configuring the lightbar
Before you use the lightbar in the field, check and configure the lightbar settings from
the Lightbar menu:
1. To access the configuration menu, do one of the following:
• Select
7 and then press o.
• Press
m on the remote control.
2. To select a configuration option and display the value, press
u or D. To accept
the setting, press
o.
3. To change the value, press
u or D. To save the change, press o.
4. To exit the configuration menu, do one of the following:
• Press
u or D until you have selected the Return to Guidance option, and
then press
o.
• Press
m on the remote control.
Action icon Description
5
End zoom mode
I
Move view left
J
Move view right
K
Move view up
L
Move view down
+
Center view on the vehicle

Zoom view in

Zoom view out