User manual

Page 8 of 36

2) Test the video server is start up normally or not. Under the Windows System, operate against the <Start

→run →command> to open the command window to input

3) <ping 169.254.178.251>

4) When using the Internet Explore at the first time, you must lower the security setting casually so as to

install the ActiveX components to the network at one time, and then select the Tool Æ Internet Options Æ

Security Æ Customize LevelÆ ActiveX Control and Plug-In>

5) Setup the security level as low and click the Apply button. Input 169.254.178.251 at the explore address

field. If pop up a dialogue box to ask if you want to install, please click Yes to start the installation.

6) Once ActiveX installation is finished, the security setting will load the default value.

4.2 Start to Login

1) Input 169.254.178.251 into the address filed and then login page will appear as follows.

2) Input the user name: 888888 (ex-factory default and administrator user) or 1 (common user)

3) Input the password: 888888 ex-factory default and administrator user) or 1 (common user)

4) Click 【Enter】button to enter into the preview picture of video server, as shown in following picture

(4-Way)

5) You can click [start] and [stop] to stop or reset the connection. During the connection process, the type

style of connecting will appear on the top left corner of the display area.