User manual

Page 7 of 36

2 Appearance and Description

¾ Power Input: DC12V and 4A

¾ Audio Output Interface: Line Level, Disequilibrium, Single Track and RCA Interface

¾ Audio Input Interface 1: Microphone Input, Disequilibrium, Single Track and RCA Interface

¾ Video Input Interface 1: 220x Sony CCD Camera

International protect level：IP66

3 Equipment and Installation

3.1 Operating Conditions

Operation System: Windows2000server/professional/XP

Network Protocol: TCP/IP

Client PC: P4/128MRAM/40GHD/, and Scaling-Supported Graphic Card and DirectX8.0 Above

3.2 Equipment Installation

a. Connect the video server into your network or use the cross twine to connect the video server to the PC.

b. Connect the standard 75Ω coaxial-cable to the BNC video input port of the video server.

c. Switch on Power (DC 12V)

d. Under the normal condition, the connection light (orange) of network will light on within 5 seconds, and

the physical connection of the video server is finished at this point.

4 IE Version Client Side

4.1 Set-Up Service

1) IP address of each video server is defaulted as 169.254.178.251 and subnet mask is defaulted as

255.255.0.0. Please make the IP address of your computer into the same net section as the video server,

and be same with the subnet mask, such as 169.254.178.55.

Four- Channel Server Interface