User manual

Page 6 of 36

Trigger Event and

Action

Trigger Conditions: Time/Alarm Input/Video Moving Detecting Video Lost

Action: Electrical Relay Output Control Peripheral Equipment

Recommended

Supported User

Quantity

IO and Control

Interface

485Transparent Channel

Embedded Type WEB

Service

Support IE Browsing, Configuration and Updating

Dynamic Domain Name Built-in Dynamic Domain Name Client Side and Second-Level Domain

Name Convenient for Dynamic IP Users

Video Input 1/2/4 Way 1.0V(P-P), 75Ω Composite, BNC, and PAL/NTSC(relating to

model)

Audio Input 1/2/4 Way BNC Interface, Microphone Input or Linear Input (relating to

model)

Audio Output 1.0V(P-P) BNC Interface and Linear Output

Hardware CPU: High-Performance DSP Processor

Operation System: Real-Time Embedded Type VxWorks Operation System

ROM: 4M Bytes Flash ROM

RAM: 64M Bytes SDRAM

Watch Dog: Apply to Program Execution of Voltage Normal of Monitoring

System

One S-485Port

One RJ-45 User Ethernet Interface

Two Led Display Network State

2/4 Alarm Input (Adopt Threshold Voltage 3.1-4.1) (relating to model)

1/4 Electrical Relay Alarm Output (1A 120VAC 1A 24VDC) (relating to

model)

Network Interface 10/100M

Installation None

System Requirements CPU: P or Higher

Internal Memory: 96M or Higher

Display: 17inch@1024×768 for Optimal Display Effect

Security 3-Layer Password Protection

Operating Temperature 5 ~ 60 

Operating Humidity 20 ~ 80%

Output Voltage DC12V /1A

Power Less than 5Watt

PCB Dimension 110mm(W) * 70mm(H)*2mm(D)(1/2 Channel)

157mm(W) * 115mm(H)*2mm(D)(4 Channel)

Installed Dimension 205mm(W)*122mm(H)*48mm(D)