User manual

Page 23 of 36

【Multi-Image Control】: 1 Image, 4-Image, 9-Image and 16-Image are optional

【Full-Screen Display】: Video image screen maximization

【Connection Control】: Start or stop the video connection of all current distributed camera image. In the

16-image format, the page-up and page-down button take no effect. Click the start button to connect all set channel

images, and click the stop button to stop all connected images. If connecting certain image or disconnecting certain

image separately is required, please click the right key to select the connecting or disconnecting in this image.

【Image Capture】: Capture the instantaneous image of the current channel

【Audio Play and Talkback Control】: Start or stop playing the audio and talkback of current channel

【Alarm Output/link】: The signal of alarm output state. If the alarm output relay attracts, the output signal

will light on. Also, clicking this light to light it on will open the alarm output as well. See the picture.

Control Button of Cradle Head

Mult i-Image Control

Full-Screen

Display

Connection

Control

Image

Capturing

Audio/Talkback

Alarm Output Link

Button