User manual

Page 10 of 36

change into green, the system will start video recording. Click the button again to stop video

recording. The video recorded is defaulted to be stored in the folder named as date in D disk. For

example, the video file recorded on 24

, March, 2005 is saved in 20050324 folder. If the space of

D disk is full, the system will automatically switch to next disk to save the video files. If no enough

space in disk, the earliest files will be deleted and the newest files will be saved.

【Playback】: Click this button to display the playback interface. Please select the date and time to click the

arrow, the system will automatically inquire about the existing video recording. Click the file to

play it directly by using the MediaPlayer.

【Output Control】: 4 output state control buttons can control 4 small signal

electrical relays on the video server, and show the state of electrical

relay through the colour state.

【Image Size】: The size of image display can be selected and the maximum size is

the full-screen display.

【Lens Control】: Click the buttons on 4 directions to control the moving direction of

cradle head; click

and to control the focus of camera lens.

In addition, select the speed stretch bar to confirm the moving speed

of cradle head.

【Parameter Setting】: The system settings include time setup, network setup,

channel setup, and image setup which are shown as right pictures.

【Clock Adjustment】: The clock of network camera can be adjusted to display on the real-time image with

the connected computer.

【Audio Format】: The compression algorithm supports MP3 only at present. The code rate of audio can be

selected. If the code rate is low, the bandwidth usage will be decreased, but the sound effect

will be worse. Therefore, if bandwidth permit, the higher the code rate is, the better the sound

effect is.