www.agelectronica.com www.agelectronica.com Honorific Users, please carefully read this system user manual before using this video server, as the functions of this machine are professionally set. Network Dome Camera PTZ-942L Network Instruction Manual www.agelectronica.com www.agelectronica.
www.agelectronica.com www.agelectronica.com Announcement This manual may not accurately describe on some technical details or contain some printing error. If you could not solve problems countered in the application process against the user manual, please call at our technology department for relevant operational methods. This manual is subject to nonscheduled change without further notice. Packing List 1. Network Dome Camera 1 Set 2. DC12V、4A Power Adapter 1PC 3. User Instruction Manual 1PC 4.
www.agelectronica.com www.agelectronica.com Contents 1 Product Introduction .................................................................................. ¡Error! Marcador no definido. 1.1 Product Introduction .............................................................................. ¡Error! Marcador no definido. 1.2 Function Introduction............................................................................. ¡Error! Marcador no definido. 1.3 Technical Specification ..........................
www.agelectronica.com www.agelectronica.com Page 4 of 36 www.agelectronica.com www.agelectronica.
www.agelectronica.com 1 www.agelectronica.com Product Introduction 1.1 Product Introduction Thanks for using our product and we’ll provide you with the best service. The network video server is the equipment dedicated for real-time transmission of digital video and audio in Ethernet.
www.agelectronica.com Trigger Action www.agelectronica.
www.agelectronica.com 2 3 www.agelectronica.com Appearance and Description ¾ ¾ ¾ ¾ Power Input: DC12V and 4A FourServer Interface Audio Output Interface: Line Level, Disequilibrium, Single Track andChannel RCA Interface Audio Input Interface 1: Microphone Input, Disequilibrium, Single Track and RCA Interface Video Input Interface 1: 220x Sony CCD Camera ¾ International protect level：IP66 Equipment and Installation 3.
www.agelectronica.com 2) 3) 4) 5) 6) 4.2 www.agelectronica.com Test the video server is start up normally or not. Under the Windows System, operate against the to open the command window to input
www.agelectronica.com 4.3 www.agelectronica.com Function Introduction 【Network Mode】: TCP and MultiCast can be selected according to your demand. Note: please select again after the page is switched. 【Channel Select】: Click the image window to make the selected image window be the current operational channel. The numbers of channels are respectively channel 1: top left; channel 2. top right; channel 3: low left; and channel 4: low right in turn.
www.agelectronica.com www.agelectronica.com change into green, the system will start video recording. Click the button again to stop video recording. The video recorded is defaulted to be stored in the folder named as date in D disk. For example, the video file recorded on 24th, March, 2005 is saved in 20050324 folder. If the space of D disk is full, the system will automatically switch to next disk to save the video files.
www.agelectronica.com www.agelectronica.com 【Video Format】: You can select it as PAL or NTSC 【Network Address and Port】: IP Address, Subnet Mask, Gateway, Multicast Address, Multicast Port Number, and ICMP Response are the network data of video server. If apply at the local area network, please take notice that don’t set the IP address collide with the IP address of computers located at the local area network.
www.agelectronica.com www.agelectronica.com 【Dynamic Domain Name】: ¾ Start up URL forwarding: As the IP address is not convenient to be memorized, you can register the domain name to get rid of annoyance of inputting the IP address. ¾ Register Host Name: mean that you can register the domain name you like. This name must be registered on the dynamic domain name server, otherwise it won’t be used normally. ¾ DNS Server Address: Run the host address of the domain name service program.
www.agelectronica.com ¾ ¾ ¾ www.agelectronica.com Character Superimposition: You can select the character content and display time to superpose on the image. The position of display character and time on the image can be also adjusted and the position coordinates on top left of image is (0, 0). Cradle Head Protocol: The selected protocol, baud rate, and address must be accordant with the protocol, baud rate and address of the selected cradle head or dome camera.
www.agelectronica.com ¾ ¾ ¾ ¾ www.agelectronica.com Code Rate Setup: Mean that the compression input code rate of the video server can be setup according to the network bandwidth. The higher the code rate is, the better the image quality. However, the occupied bandwidth will increase as well. Please adjust the setting according to your actual bandwidth situation. It’s recommended that the quantized setup ranges from the maximum quantized value of 31 to the minimum quantized value of 4.
www.agelectronica.com www.agelectronica.com 【Moving Detection】: It can detect whether the mobile objects exist in current images. If alarm output is set, the mobile object will trigger the alarm. ¾ ¾ Sensitivity Adjustment: the setting of adjusting the detecting sensitivity. Under the high-sensitivity setting, the object moving at slow speed will also trigger the alarm. Test Switch: Open this switch to test that the sensitivity you set is appropriate or not.
www.agelectronica.com ¾ ¾ ¾ www.agelectronica.com Select All: Set the whole image as the detecting area. Delete All: Delete the set area. Confirm: Save the current setting. 【Image Mask】: 【Moving Detection Planning】: ¾ The video server supports the selection for many kinds of alarm methods and implementation time, and the arrangement of all kinds of plan tasks is set at the “detection planning”. The detection planning can be designed as the project of various complex monitoring starting and closing.
www.agelectronica.com ¾ www.agelectronica.com No matter the moving detection or the external alarm detection, there is a plan task list. In accordance with the setting in this list, the video server will start or stop alarm. The plan task consists of 7 groups of settings totally, and each group includes the date, starting time and ending time.
www.agelectronica.com www.agelectronica.com 【Setting Save and Restore】: Save the current settings or load the default setting. 【User Information】: Support the password supervisor privilege and only administrator can modify the parameters. Page 18 of 36 www.agelectronica.com www.agelectronica.
www.agelectronica.com 5 www.agelectronica.com RealWorld Client-Side Centralized Management Software 5.1 Brief Introduction The network monitoring management software adopts the distributed type system framework and C/S system structure, based on TCP/IP network platform. Currently, this monitoring management software can manage 80-way channels and support the electronic map.
www.agelectronica.com www.agelectronica.com And then carry on the installation according to the prompt of installation tool till the steps shown in following picture appear, and select the [Finish] button to install the program successfully. 5.3 Function Operation 5.3.1 Start Network Monitoring Management Software Select the program group for installation in the [Start] menu, shown as following picture. Page 20 of 36 www.agelectronica.com www.agelectronica.
www.agelectronica.com www.agelectronica.com Run the left key of mouse to click [RealWorld NDVR] to display the dialogue box as follows. Input the user name in the user name filed, and password in the password filed (The user name after initial installation is admin and the password is blank), and then click the [Confirm] to display the main interface shown in the following picture. 5.3.
www.agelectronica.com www.agelectronica.com Description of bottom tool buttons: Camera Distribute Camera User Login Window Style System Log Lock System Playback Setting Edit E- Map System SettingOpen/Close E-Map Clear Ala 【User Login】: You can set password or set no password when starting the video server. 【Distribute Camera】: Click the button to call out the dialogue box of distributing camera.
www.agelectronica.com www.agelectronica.com Multi-Image Control Full-Screen Display Connection Control Image Capturing Audio/Talkback 【Multi-Image Control】: 1 Image, 4-Image, 9-Image and 16-Image are optional 【Full-Screen Display】: Video image screen maximization 【Connection Control】: Start or stop the video connection of all current distributed camera image. In the 16-image format, the page-up and page-down button take no effect.
www.agelectronica.com www.agelectronica.com Aperture Focus Zoom Preset Point Assistant Switc Cradle Head Speed 5.3.3 Distribute Camera Before distributing the cameras, if the video server is located at the same local area network, please make sure that your IP network section is accordant with the video server. Select the [Distribute Camera] button or click the right key in the video channel to popup the menu to select the camera distribution.
www.agelectronica.com www.agelectronica.com ¾ Use DDNS: DDNS is the DDNS client side embedded by the video server. It works together with the DDNS server side provided by the developer. When using the DDNS function, the server name is the signal for searching this server. If the server name is incorrectly filled, the error information of failing to find the server will be returned.
www.agelectronica.com ¾ ¾ ¾ www.agelectronica.com Select Channel: In case of many channels, the users can select the channel to be set as required. Code Stream Type: Composite Stream and Video Stream. The composite stream refers to the composite coding of the audio and video. This selection allows transmission of both audio and video; if the video stream is selected, only video but no audio is transmitted.
www.agelectronica.com www.agelectronica.com protocol. The updating file of cradle head protocol is provided by the supplier. 4) Alarm Setting: Open or close the alarm and set the alarm time and link video recording and preset point as required. 5) Others: Set the starting of alarm screening and the time and linkage video of alarm linkage. Page 27 of 36 www.agelectronica.com www.agelectronica.
www.agelectronica.com www.agelectronica.com 5.3.5 System Setting The system setting is composed of the system parameter, system user, forwarding service setting and user management. 1) System Parameter: Alarm sounds of different channels, file packing length, log saving directory and others can be set up. 2) System User: User name, password and other information can be added and modified. Page 28 of 36 www.agelectronica.com www.agelectronica.
www.agelectronica.com www.agelectronica.com 3) Forwarding Server Setting: The video server management software contains the function of data forwarding. If you want to open the video signal for forwarding some channel, please select the option of [start the forwarding server]. The parameters of the forwarding server all refer to the address parameters of the server which is located by this management software.
www.agelectronica.com www.agelectronica.com After finishing the forwarding service port setting, you can open other machine to connect to the forwarding server. See the picture. Among the necessary parameters, the server name is the sign for confirming to connect to a certain server. For example, this channel forwards the channel 0 of the video server whose name is 123, so this server name must be the name of this server. In the video server, this name is defaulted as video server.
www.agelectronica.com ¾ www.agelectronica.com If the forwarding server runs at the interior of the local area network, the setting is equal to the forwarding Internet. That is, the port mapping is required and then connection made. 4) The user management of the forwarding server: it can automatically refresh out the forwarding server, so as to convenient for user management. See the picture. 5.3.6 Electronic Map The management of electronic map supports the directory tree structure. See the picture.
www.agelectronica.com www.agelectronica.com Add Alarm Unit Moving Function Add Camera Add Alarm Probe Establish several videotaping points, alarm probes and alarm units in the electronic map through the “edit” function in the elementarily-finished electronic map. Double click the videotaping points established in the electronic map to open the corresponding videotaping images, and double click the probe alarm icon by right ky to open and close the alarm output.
www.agelectronica.com 7 www.agelectronica.com Restore to Default Setting Click the [Confirm Restore] in the browser to load the default setting. However, you must know the IP address of the video server firstly. If you forget the IP address, please press the “reset” button in the panel and then the video server will automatically reset. Its IP address is 169.254.178.251, subnet mask is 255.255.255.0 and gateway is 169.254.178.1.
www.agelectronica.com www.agelectronica.com external network will not see the interiority of the local area network. In this case, some settings shall be done on the connected server. Solution: ¾ If used at the local area network located at the office and building, but still want to visit this video server in other cities, you can make the forwarding by taking advantage of the machine accessing into the Internet.
www.agelectronica.com 9 www.agelectronica.com Appendix Appendix A Problem Description on Video Server Port Occupation (Mapping) This video server occupies the following ports when carrying on the video transmission service on the Internet: TCP: 80, 3000 and 3001 If one IP address exit owns several video servers, corresponding ports of the server must be modified as required, such as Web and data transmission starting port, plus 1 on the basic address sequence. UDP transmission port is 3002.
www.agelectronica.com www.agelectronica.com Appendix C Description on Alarm Input and Output Connection Method The alarm input and alarm unit of the network video server generally own the 2 kinds of connection methods as follows: Alarm Output Connection Mode of the Network Video Server: A small signal electric relay (120VAC: 1A and AC120V: 1A) is built in the network video server to produce the switching signal.
www.agelectronica.com www.agelectronica.com between each model or appearance or function differing from those described in this manual because of system software updating, please contact the manufacturer at any time. Please forgive that we could not inform you of these changes timely. Page 37 of 36 www.agelectronica.com www.agelectronica.
