User guide

DescriptionQuantityPart No.Item
Frame Weldment - with 8 Ft Tunnel Only142.09011171
Frame Weldment - with 9 Ft Tunnel Only142.0901121
Stripper Plate - 45 in. Weld In G6070 (Non Gearbox End)AR42.00000931a
Stripper Plate - 35 in. Weld In (Gearbox End)AR42.00000941b
Stripper Plate - 33 in. Weld In G6070 (Gearbox End), (Non Gearbox End)AR42.00000951c
Bearing, Drive, 3-7/16 in. Spherical 4 Bolt Footed - (G6060 S/N 42.05168 &
After)
142.09003722
Bearing, Drive, 2-15/16 in. 4 Bolt Footed142.09003713
Rotor + Three Teeth & Caps - (Weld Req`d)142.09011394
Stub Shaft Drive, Weld In142.60020054a
Stub Shaft Idle, 2-15/16 in. Weld In142.60020084b
Tooth Assembly w/Cap3642.10200184c
Cap, Rotor Tooth, Weld On3642.10200014d
Bearing, 4 Bolt Flange242.15100445
Gearbox, Single Output - PB6000 Only142.15200516
Bearing, Split Babbit242.15100477
Drum, Cable, w/Brake Flange, 7 Ft Rotor - 6070 Only242.09002468
Weldment, Rotor Access, Drive142.09003499
Weldment, Rotor Access, Idle142.090044710
Bolt, Hex, 3/4-10 x 3-1/2 in. Gr 5890421511
Nut, Hex Lock, 3/4-10 Nylock890634912
Washer, Lock, 5/8 in.Yellow Zinc890050813
Bolt, Hex, 5/8-11 x 2 in. Gr 5890425314
Bolt, Hex, 1/2-13 x 1-3/4 in. Gr 5890351815
Nut, Hex Lock, 1/2-13 Nylock1690640116
Bolt, Hex, 1/2-13 x 1-1/2 in. Gr 5890330617
Bolt, Hex, 5/8-11 x 2-1/2 in. Gr 5490383218
Nut, Hex Lock, 5/8-11 Nylock490640219
Coupling, Cable Drum142.600302120
Cable Drum, Non Brake Side, 6 Ft Rotor142.600302421
Cable Drum, Brake Side, 6 Ft Rotor142.600302522
Key, Square, 3/8 in. x 3 in. Undersize201.7326623
Hitch, Field, 8-9 Ft w/Decals142.090179324
Jack, Manual, 15 in. Square Mount142.150139825
Pin, Hitch142.155017226
Pin, Hair105.7312027
Mount, (Weld On), Jack, Female Square TubingAR42.150140028
PB6000 - 7 - 42.0901803A Issue Date: 09/11
Section 1
1.01 Frame with Rotor & Cable Drums PB6000