User guide

Safety Sign, Warning, High Pressure Oil.....35
Safety Sign, Warning, No Step.....35
Safety Sign, Warning, Shield Is Off.....35
Safety Tube (Not Serviced Separately).....39
Screw, Hex Hd, 1/4-20 x 3/4 in.Thread Cutting
Stainless Steel.....33
Screw: Fshcs, 1/4-20 x 3/4 Yellow Zinc.....51
Screws, Bolt-Nut M10 x 50mm CL8.8.....39
Seal Kit, H-Series (For Item 17).....19
Seal Kit, Hydraulic Motor Item 4.....41
Seal, 1.937 - 2.623 x .312.....37
Seal, 2.750 - 3.500 x .375.....37
Setscrew, 3/4-10 x 3/4 in......15
Setscrew, 5/8-11 x 5/8 in......15
Setscrew, Hex Socket, 3/8-16 x 1/2 in. (G6060
& PB6000 Only).....19
Shaft, Conveyor Drive (G6060 & PB6000
Only).....19
Shaft, Conveyor Idle (G6060 & PB6000
Only).....19
Shaft, Cross 700110.....37
Sheet: Polyethylene - Hd 1/8 x 29-7/8 x
96.....51
Shield Support, #6-7 Inner 6G602.....39
Shield Support, #6-7 Outer 6G502.....39
Skirt, Conveyor (G6060 & PB6000 Only)....19
Slat, Conveyor Chain (G6060 & PB6000
Only).....19
Sling, Backstop Cable, 7/16 x 35 in......31
SMV w/ Plastic Backing.....33, 35
Spacer, Bag Boom, Bronz, 2-15/16 in......29
Spindle, Single, 2-7/16 in. (Weld In) (Includes
Items 2 thru 4).....11
Spray Adhesive - Not Shown.....43
Spring, Compression.....23
Spring, Extension.....15
Sprocket.....47
Sprocket, 120-2A11, 2-7/16 in. Bore, 5/8 in.
Keyway.....15
Sprocket, 120-2B42, 2-15/16 in. Bore, 3/4 in.
Key - (G6060 S/N 42.05167 & Before) &
PB6000 Only.....15
Sprocket, 120-2B42, 3-7/16 in. Bore, 7/8 in.
Key - (G6060 S/N 42.05168 & After).....15
Sprocket, 120-2B48, 3-7/16 in. Bore, 7/8 in.
Key - G6070 Only.....15
Sprocket, Drive (G6060 & PB6000 Only)....19
Sprocket, Idle (G6060 & PB6000 Only).....20
Stabilizer, Conveyor Angle Adjustment.....23
Strip, Conveyor Skirting Center (G6060 &
PB6000 Only).....19
Stripper Plate - 33 in.Weld In G6070 (Gearbox
End), (Non Gearbox End).....7
Stripper Plate - 35 in. Weld In (Gearbox
End).....7
Stripper Plate - 45 in. Weld In G6070 (Non
Gearbox End).....7
Stub Shaft Drive, Weld In.....7
Stub Shaft Idle, 2-15/16 in. Weld In.....7
Stud, Wheel, 1/2-20 x 2-1/8 in......11
Support, Backstop Transport - Long - G6060,
G6070 & G6070P With Tunnel Extensions
Only.....31
Support, Backstop Transport - Long - G6060,
G6070 & G6070P Without Tunnel Extensions
Only.....31
T
Tensioner, Rotor Chain.....15
Tire, 235/85R16, G6060.....13
Tire, 265/75R16, G6070 & G6070P.....13
Tire, 9.5L x 15 Farm Implement, PB6000....13
Tool, Bag Vent.....43
Tooth Assembly w/Cap.....7
Tube.....39
Tube, CARDAN #6 Inner.....39
Tunnel Extension Base, 18 in. - G6060, G6070
& G6070P Only.....9
Tunnel Extension Base, 29 in. - G6060, G6070
& G6070P Only.....9
Tunnel Extension Base, 29 in. - LH - G6060,
G6070 & G6070P Only.....9
Tunnel Extension Base, 29 in. - RH - G6060,
G6070 & G6070P Only.....9
Tunnel Extension, 10` x 29 in. - G6070 &
G6070P Only.....9
Tunnel Extension, 8` x 29 in. - G6060 Only...9
Tunnel Extension, 9` x 29 in. - G6060 Only...9
Tunnel Extension, 9` x 29 in. - G6070 &
G6070P Only.....9
Tunnel Hood, 10` - G6070 & G6070P Only...9
Tunnel Hood, 8` w/Decals - G6060 Only.....9
Tunnel Hood, 9` - G6070 & G6070P Only.....9
Tunnel Hood, 9` w/Decals- G6060 Only.....9
V
Valve, Bag Vent.....43
Valve, Conveyor Motor, Aluminum Body
w/Plug.....41
W
Washer, Flat 5/8 in......9
Washer, Flat, 1/2 in......20, 49
Washer, Flat, 1/4 in......19
Washer, Flat, 1/4 in. Stainless Steel - G6060
& PB6000 Only.....17
Washer, Flat, 1/4 in. Stainless Steel - G6070
& G6070P Only.....17
Washer, Flat, 3/4 in......15, 45
Washer, Flat, 3/8 in......20, 29, 49
Washer, Flat, 3/8 in. SAE.....23
Washer, Flat, 3/8 in. Wide Stainless Steel.....9
Washer, Flat, 5/8 in. SAE.....23
Washer, Flat, 7/16 in......15
Washer, Gandy.....47
Washer, Lock, 3/4 in.Yellow Zinc.....45
Washer, Lock, 5/16 in......41
Washer, Lock, 5/8 in.Yellow Zinc.....7
Washer, Spindle.....11
Washer, Sponge, Gandy.....47
Weldment, Rotor Access, Drive.....7
Weldment, Rotor Access, Idle.....7
Wheel, 15 x 6 PB6000.....13
Wheel, 16 x 6 G6060.....13
Wheel, 16 x 8 G6070 & G6070P.....13
Whip, Grease, 3/16 x 21 in......15
Whip, Grease, 3/16 x 28 in......15
Winch, Brake.....25, 29
Winch, Manual (G6060 & PB6000 Only).....19
Y
Yoke.....39
Yoke, #6 Inner Tube.....39
Yoke, #6/S7, 1-3/8 in. Z6 Ball.....39
Yoke, Ball Shear #6, 1-3/4 in. 27QD.....39
Z
Zerk, Grease, 1/4-28, 65°.....27
Zerk, Grease, 1/8 NPT Female.....15
Zerk, Grease, 1/8, 45°.....27
42.0901803A Issue Date: 09/11 - 56 - PB6000
Part Description Index (continued)