Instruction Manual

1-3
PB6000, G6060, G6070, G6070P
42.0901540B Issue Date: 4/10
Item Part No. Quantity Description
SECTION 1
1 42.0900413 1 Frame Weldment - G6070 Only
42.0900586 1 Frame Weldment - G6060 S/N 42.05167 & Before
42.0901595 1 Frame Weldment - G6060 S/N 42.05168 & After
42.0901117 1 Frame Weldment - PB6000 with 8 Ft Tunnel Only
42.0901121 1 Frame Weldment - PB6000 with 9 Ft Tunnel Only
1a 42.0000093 AR Stripper Plate - 45" Weld In G6070 (Non Gearbox End)
1b 42.0000094 AR Stripper Plate - 35" Weld In
G6060 (Gearbox End) & PB6000 (Gearbox End)
1c 42.0000095 AR Stripper Plate - 33" Weld In G6070 (Gearbox End),
G6060 (Non Gearbox End) & PB600 (Non Gearbox End)
2 42.0900372 1 Bearing, Drive, 3-7/16” Spherical 4 Bolt Footed - G6070 &
(G6060 S/N 42.05168 & After)
3 42.0900371 1 Bearing, Drive, 2-15/16” 4 Bolt Footed - G6060 & PB6000 Only
4 42.0900863 1 Rotor + Four Teeth & Caps - G6070 Only (Weld Req’d)
42.0901137 1 Rotor + Four Teeth & Caps - G6060 Only 2-15/16” Shaft
(Weld Req’d) (S/N 42.05167 & Before)
42.0901599 1 Rotor + Four Teeth 3-7/16” Shaft - (Weld Req’d)
(G6060 S/N 42.05168 & After)
42.0901139 1 Rotor + Three Teeth & Caps - PB6000 Only (Weld Req’d)
4a 42.0900380 1 Stub Shaft Drive, Weld In - G6070 &
(G6060 S/N 42.05168 & After)
42.6002005 1 Stub Shaft Drive, Weld In - (G6060 S/N 42.05167 & Before)
& PB6000 Only
4b 42.6002008 1 Stub Shaft Idle, 2-15/16” Weld In
4c 42.1020018 56 Tooth Assembly w/Cap - G6070 Only
42.1020018 48 Tooth Assembly w/Cap - G6060 Only
42.1020018 36 Tooth Assembly w/Cap - PB6000 Only
4d 42.1020001 56 Cap, Rotor Tooth, Weld On - G6070 Only
42.1020001 48 Cap, Rotor Tooth, Weld On - G6060 Only
42.1020001 36 Cap, Rotor Tooth, Weld On - PB6000 Only
5 42.1510044 2 Bearing, 4 Bolt Flange
6 42.1520814 1 Gearbox, Dual Output - G6060 & G6070 Only
42.1520051 1 Gearbox, Single Output - PB6000 Only
7 42.1510047 2 Bearing, Split Babbit
8 42.0900246 2 Drum, Cable, w/Brake Flange, 7 Ft Rotor - 6070 Only
9 42.0900445 1 Weldment, Rotor Access, Drive - G6070 &
(G6060 42.05168 & After)
42.0900349 1 Weldment, Rotor Access, Drive - (G6060 S/N 42.05167 & Before)
& PB6000 Only
10 42.0900447 1 Weldment, Rotor Access, Idle
11 904215 8 Bolt, Hex, 3/4-10 x 3-1/2” Gr 5
12 906349 8 Nut, Hex Lock, 3/4-10 Nylock
13 900508 8 Washer, Lock, 5/8” Yellow Zinc
14 904253 8 Bolt, Hex, 5/8-11 x 2” Gr 5
15 903518 8 Bolt, Hex, 1/2-13 x 1-3/4” Gr 5
Sect. 1 - Frame With Rotor & Cable Drums Parts List