Warranty

STATEMENT OF LIMITED WARRANTY
For AFX INC.
LED Indoor/Outdoor Products
FOR SHIPMENTS WITHIN THE UNITED STATES AND CANADA
8/1/14
Subject to the exclusions set forth below, AFX Inc. warrants its indoor/ outdoor light emitting diode
(LED) fixtures, including the LED arrays and the LED drivers and integral control devices (“Product(s)”) to
be free from defect in material and workmanship (the “General Warranty”) for a period of five (5) years
from the date of shipment from AFX’s facilities. The LED arrays in the Product(s) will be considered
defective in material or workmanship only if a total of 15% or more of the individual light emitting
diodes in the Product(s) fail to illuminate.
Ballasts, lamps, emergency batteries and poles are excluded from the General Warranty. Ballasts, lamps,
emergency batteries, and poles are warranted separately. Manufacturers of ballasts, lamps, emergency
batteries and poles incorporated into the Product(s) are solely responsible for any costs or expenses
related to any claims, repairs, or replacements associated with any such component(s). Assistance with
warranty claims for any such component(s), and/or copies of each applicable manufacturer’s warranty,
may be obtained from an authorized AFX post-sales or customer service representative.
This Statement of Limited Warranty (“Warranty”) applies only when the Product(s) are installed in
applications in which ambient temperatures are within the range of specified operating temperatures
and are operated within the electrical values shown on the LED driver Label. AFX will not be responsible
under this Warranty for any failure of the Product(s) that results from external causes such as: acts of
nature; physical damage; exposure to adverse or hazardous chemical or other substances; use of
reactive cleaning agents and/or harsh chemicals to clean the Product(s); environmental conditions;
vandalism; fire; power failure, improper power supply, power surges or dips, and/or excessive switching;
induced vibration; animal or insect activity; fault or negligence of purchaser, any end user of the
Product(s) and/or any third party not engaged by AFX; improper or unauthorized use, installation,
handling, storage, alteration, maintenance or service, including failure to abide by any product
classifications or certifications, or failure to comply with any applicable standards, codes,
recommendations, product specification sheets, or instructions of AFX; use of the Product(s) with
products, processes or materials supplied by any end user or third party; or any other occurrences
beyond AFX’s reasonable control. AFX also will not be responsible under this Warranty for any
substantial deterioration in the Product finish that is caused by failure to clean, inspect or maintain the
finish of the Product(s). If the Product(s) are used on existing foundations, anchorages or structures, the
end user is solely responsible for the structural integrity of such existing foundations, anchorages or
structures and all consequences arising from their use. Adequate records of operating history,
maintenance, and/or testing must be kept by the end user and provided to AFX upon request to
substantiate that the Product(s) have failed to comply with the terms of this Warranty.