Instruction Manual

LED Outdoor Sconce Luminaires Models # PAXW071223LAJD2xx
Surface Mount PAXW071828LAJD2xx
120-277VAC / 60Hz
Page 2 of 2 8061066 R2
4. Fixture back pan mounting.
A. For PAXW071223LAJD2xx, install fixture back pan (5) to mounting bracket (2) by aligning to two studs (3) then secure with two thumb nuts
(6).
B. For PAXW071828LAJD2xx, install fixture back pan (5) to mounting bracket (2) by aligning to two studs (3) then secure with two thumb nuts
(6). For additional support use two wood screws (10) on previously drilled holes or plastic anchors (11).
5. Diffuser installation.
A. Install diffuser (7) to the back pan (5) by aligning top and bottom holes then secure with two #8-32 screws (8).
6. For Wet Location Use:
A. Apply a small amount of silicone (not included) per manufacturer’s instruction around screws (8) and around the diffuser (7) where it contacts
with the surface of the wall on top and two sides, but not on bottom.
7. Restore power at fuse or circuit breaker box.
Limited Factory Warranty
AFX Inc. hereby warranty that this fixture is free from defects in materials and workmanship when installed and used under normal operating conditions
for a period of 5 years from date of shipment from factory. This warranty covers all component parts and extends only to replacement of defective fixture
or components; it does not cover failure due to improper installation, misuse, mishandling, or damage incurred in transit.