Instructions / Assembly
LED Fixed Rail Luminaires             Part #: 295326    
Surface Mount  
120VAC / 60Hz 
Distributed by:                      To Reorder: 
HD Supply Facilities Maintenance, Ltd. 
Atlanta, GA 30339                    1-800-431-3000 
© 2017                        hdsupplysolutions.com 
Made in China           
REPLACING THE LED DRIVER 
IMPORTANT! Do NOT disassemble product. This operation is only for the replacement of a faulty LED Driver. 
IMPORTANT! It is recommended that the replacement of an LED driver be completed by a qualified electrician. 
CAUTION! Turn off main power at fuse or circuit breaker box. 
Disassembly: 
1.  Remove fixture from wall by removing (2) canopy 
screws. 
2.  Disconnect LED driver power wires from power supply 
wires in junction box by removing wire nuts. 
3.   Separate LED driver from canopy by removing (2) 
screws. 
4.   Disconnect (2) driver wires from fixture wires. 
NOTE: Mark fixture wires with tape to match black wire 
with parallel fixture head wires on one side, and red wire 
with parallel fixture head wires on the other side 
5.   Discard driver. 
Reassembly: 
1.  Using new LED driver, connect red and black wires to 
matching parallel fixture head wires with wire nuts.  
2.  Re- attach driver to canopy with 2 screws. 
3.  Connect power supply wires from drive to power supply 
wires from junction box. 
4.  Connect black wire to black wire, white to white and 
ground (copper) to ground (green or copper) 
5.  Tuck supply wires in junction box. 
6.  Connect canopy to junction box/gem bar with (2) screws 
7.  Restore power to the fixture. 
Limited Factory Warranty 
This product is manufactured by AFX Inc. This fixture is warranted to be free from defects in materials and workmanship when installed and used under 
normal operating conditions for a period of 5 years from date of purchase. This warranty covers all component parts and extends only to replacement of 
defective fixture or components; it does not cover failure due to improper installation, misuse, mishandling or damage incurred in transit. 
Dimmer Compatibility 
This product can be dimmed down to 10% of full scale using a standard  
two-wire (ELV) dimmer. This table provides a list of known compatible dimmers: 
Brand    Series    Model# 
Lutron®:    Diva    DVELV-300P 
    Maestro    MAELV-600P 
    Skylark    SELV-300P 
8060893 R0 


