User manual

ManualsBrandsAFX ManualsLight EffectsDMX laser light effect

051-060

061-070

071-080

081-090

091-100

101-110

111-120

121-130

131-140

141-150

151-160

161-170

171-180

181-190

191-200

201-210

211-220

221-230

231-240

241-250

251-255

1# + 5#

2# + 6#

3# + 7#

4# + 8#

1# + 2#

3# + 4#

5# + 6#

7# + 8#

1# + 8#

4# + 5#

1# + 3# + 5#+ 7#

2# + 4# + 6# + 8#

3# + 4# + 5# + 6#

1# +2# + 7# + 8#

1# +2# + 3# +4#

5# + 6# + 7# + 8#

1# + 2# + 3# +4# + 5# + 6# + 7# + 8#

6 STROBE 000-010

011-255

NO STROBE

STROBE ( FROM SLOW TO FAST )

7 MODE 000-010

011-200

201-255

DMX MODE

AUTO MODE

SOUND MODE

8 SPEED MODE 000-255 AUTO / SOUND SPEED CONTROL ( FROM SLOW TO FAST )

The following points have to be considered during the inspection:

All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.

There must not be any deformations on the housing, glass pane, fixations and installation spots.

The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions

depending on the installation spot and usage have to be adhered to by a skilled installer and any safety problems

have to be removed.

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.

CAUTION: Disconnect from mains before starting maintenance operation!

Cleaning and Using Frequency of Product

Please make sure that the light is power off before dismantling or maintaining, it’s very important to keep the light

clean. Frequent cleaning will ensure maximum brightness output, but also prolong the life time. It’s suggested to use

the high quality, professional glass detergent and soft cloth to clean the light. It’s not allowed to use alcohol or

chemical solvent. The inner part of the light should be cleaned by vacuum cleaner at least once a year.

When the light doesn’t work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced,

find out the faulty and restart the light. But please note the repair must be handled by professional.