User guide

Manual Issue 046 Ovation Systems Ltd. Page 6
Time-Lapse DVD Recorder
User Guide
3.1 Front Panel Controls
15:25:34 21FEB05
Recording-TL
Serial No 000005
▲ Up
▼ Down
► Select a menu item.
MENU Steps though main menu items (At any point, pressing for
more than 2 seconds exits all menus).
REC Starts / stops recording (shows red when recording, flashing
red when recording in time-lapse).
DVD Powers up DVD drive, opens / closes tray, starts DVD burn.
ON Power-up unit.
STBY Power down unit (standby for timer modes).
In general, a parameter flashes when it can be adjusted by the ▲ ▼ keys. The new
setting may be stored by pressing the MENU key. Alternatively, the current status will
be automatically stored when the screen times-out after 3 minutes. When not
recording, AfterBurner automatically enters stand-by when no key is pressed for 5
minutes.
Tip: At any point when navigating the LCD menus, it is possible to return to the start-
up screen by pressing the MENU key for 2 seconds.
Tip: During set-up, the LCD text is duplicated onscreen on the rear panel’s BNC video
monitor output.
The top-level menu items are shown below. They are displayed by repeatedly pressing
the “Menu” button.
DVD:
Quality:
Set time per DVD 24hr
default
Very low, low, medium,
high, very high
Video only, audio + video, audio
mode
MB No. of copies: 1, 2, 3, 4, 5, 6,
7, 8
Burn:
Eject:
Auto Mode, Manual only, at
given time.
Manual, when burnt
Lists files recorded on AfterBurner
Figure 2:Top Level Menu Items
Afterburner firmware .046 www.ovation.co.uk