User guide

Manual Issue 046 Ovation Systems Ltd. Page 28
Time-Lapse DVD Recorder
User Guide
6 Appendix1: AfterBurner Operation Hits & Tips
6.1 Reviewing The Unit’s Configuration
When the unit is not recording and showing the default LCD screen (date / time etc).
Pressing the ► key for 2 seconds will show a list of configuration parameters. The
▲ ▼ keys allow the user to scroll through the items. Pressing the “MENU” key returns
to the display to the default screen.
6.2 Reset to Factory Defaults
Go to the “Set Configuration” in the Advanced Menus and press ▲ followed by ► (see
section 4.11, page 22).
6.3 Transferring AfterBurner Configuration to Other Units
From version 034 onwards, AfterBurner burns to the root directory of each DVD a file
called "aftburn.ini" which contains the configuration of that unit at burn time. Other
AfterBurners may be loaded with exactly the same configuration by the following
procedure.
● Go to the "Set configuration" advanced menu of the unit that is to be configured.
Set “load CD/DVD ini" to "Yes". See Section 4.11, page 22)
● Press the DVD button and open the DVD tray. Insert a DVD recorded on the
master AfterBurner. Close the tray and the configuration will automatically load.
TIP: It is possible to transfer just the "aftburn.ini" file from the master DVD to a separate
CD or DVD. This disk can then be used to configure other AfterBurner units.
TIP: It is also possible to transfer the AfterBurner configuration from one unit to another
by a PC software configuration utility. Please contact Ovation Systems for more
information.
Afterburner firmware .046 www.ovation.co.uk