User guide

Manual Issue 046 Ovation Systems Ltd. Page 25
Time-Lapse DVD Recorder
User Guide
11 Out Time-out Mirrors the “Time In” pin 4 in the format
selected in Section 4.7, page 20) If in
external time-sync mode, and no external
time code signal received, AfterBurner
outputs its internal clock. Can be used to
synchronise a second AfterBurner unit.
12 Out Chain-out Asserted when disk is 5 MB from being full.
Can be used to start a second AfterBurner
recording when connected its “Chain In”
input.
13 Out Fault Active low, open collector output.
14 - Com-rail
(was called
Common)
Common connection for all open collector
outputs +24 V Max.
4k7
4k7
+5V
+12V
TTL
Output
Driving
an LED.
Driving
a Relay.
7
7
7
14
Pin 8,9,10
12 or13
Pin 8,9,10
12 or13
Pin 8,9,10
12 or13
6 to 24V
Figure 6: AfterBurner Control Output Interface
Afterburner firmware .046 www.ovation.co.uk