User guide

Manual Issue 046 Ovation Systems Ltd. Page 19
Time-Lapse DVD Recorder
User Guide
User OSD Set-up:
Enter by pressing ► at the flashing “User” prompt. There are 5 possible on-screen
items that can be set-up to show a number of parameters, along with the position,
colour and format.
Set OSD Format
===================
1: Y:00 X:21 Green
Date: ddMonyyyy
The following describes the adjustable parameters of the LCD screen example above.
1: 1 to 5: OSD item being adjusted. By default (. 1: Date, 2:Time,
3:Frame rate, 4: disabled, 5:diabled)
Y:00 text vertical position (line number, max 11).
X:21 text horizontal position (left is 0, 29 is right)
Green text colour
Date This lower line shows the parameter for this item number and
format to be displayed. There are a number of viewable parameters
including date & time (in various formats), picture record rate, frame
number, internal PSU temperature, and choice of two user-defined
20-character text strings.
NB: Text in the middle of the screen (lines 4 to 7) flashes indicating that it is only shown
on the video monitor output and not recorded. This allows status messages to be shown
onscreen without interfering with the recoded video.
Afterburner firmware .046 www.ovation.co.uk