ASSEMBLY INSTRUCTION MERAX SOFA SET WF191271AAA WF191271AAC
N I L E D L A O K H F F G B G C Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during asembly, please loosen all the other screws to 50% and continue the assembly process. 5.
Part list A B Bench back frame (1 pc) Bench seat frame (1 pc) D E Table leg left frame (1 pcs) G Right frame (3 pcs) K Table leg right frame (1 pcs) H Chair seat frame (2 pcs) F Left frame (3 pcs) I Table glass (1 pc) Seat chair cushion (2 pcs) L N Seat bench cushion (1 pc) Table side frame (2 pcs) O Chair back frame (2 pcs) C Table top frame (1 pc)
Hardware list 1 2 Bolt M6 x 25 mm (20 pcs) Bolt M6 x 40 mm (29 pcs) 3 Allen key M4 (1 pc)
STEP 1 (Bench assembly) Connect Bench back frame (A) & Bench seat frame (B) with Bolt (2) A 2 2 2 B STEP 2 Connect part from Step 1 & Left frame (F) with Bolt (2) & Bolt (1) 2 2 2 1 F
STEP 3 Connect part from Step 2 & Right frame (G) with Bolt (2) & Bolt (1) 2 2 2 1 G STEP 4 Put on Bench cushion (K) to complete Bench K
STEP 5 (Chair assembly) Connect Chair back frame (O) & Chair seat frame (C) with Bolt (2) STEP 6 Connect part from Step 5 & Left frame (F) with Bolt (2) & Bolt (1) O 2 2 2 2 1 F C STEP 7 STEP 8 Connect part from Step 6 & Right frame (G) with Bolt (2) & Bolt (1) Put on Chair cushion (H) to complete Chair 2 H 2 1 G 2
STEP 9 (Table assembly) Connect Table side frame (L) - Table leg right frame (D) & Table top frame (N) with Bolt (1) STEP 10 Connect part from Step 9 & Table leg left frame (E) with Bolt (1) E L 1 D 1 1 1 1 N STEP 12 STEP 11 Connect part from Step 10 & Table side frame (L) with Bolt (1) Put on Table glass (I) to complete Table I L 1 1 1
