User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Labeling and Hazard Warning
- Hardware Overview
- User Interface Overview
- FleXpress® Fault Locate Test Setup
- General Settings
- Live Fiber Detection and Launch Quality Check
- Live PON Test
- LinkMap Display and Navigation
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Probe and FlexScan
- File Manager
- Transferring Results to a PC via USB
- Back Up Saved Results to USB Memory
- How to View Device Information
- General Information
8
User Interface Overview
New Test - FlexScan’s Home Screen
The New Test screen is the FlexScan’s main screen that is displayed at startup.
From the New Test screen you may perform the following setup and operations:
1. Press Home/Menu button to display the Test/Home Menu screen and select Save, Send, or congure General
Settings.
2. Press Start/Stop button to enable Live Fiber check, or to start a new test, or (if test is running) to end a test.
3. Press VFL button to enable VFL mode.
4. Touch Tool icon to congure Test Settings or select OLS/OPM or Inspection.
5. Touch Launch Cable to change LC length.
6. Touch Network to congure Network Type: Pt-to-Pt or FTTH PON and expected split ratio.
2
3
1
4
5 6