User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Labeling and Hazard Warning
- Hardware Overview
- User Interface Overview
- FleXpress® Fault Locate Test Setup
- General Settings
- Live Fiber Detection and Launch Quality Check
- Live PON Test
- LinkMap Display and Navigation
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Probe and FlexScan
- File Manager
- Transferring Results to a PC via USB
- Back Up Saved Results to USB Memory
- How to View Device Information
- General Information
7
Battery Charging
You may charge the battery while your FlexScan is switched on or off by attaching the supplied AC charger.
• Plug the included AC charger into AC outlet.
• Connect charger plug to the Power port.
• AC/Charger indicator will illuminate to indicate charging status as follows:
– RED - Charging battery
– GREEN - Fully charged
– OFF - AC disconnected
– Flashing RED/GREEN = Battery charging halted due to over-temperature.
• FlexScan charges while operating.
• A fully-charged battery operates for approximately 12 hours of typical use.
Understanding Battery Charge Status
When FlexScan is ON, battery icon shown on the display indicates battery status as follows:
- Battery fully charged
- Battery partially charged
- Battery nearing empty
- Battery discharged
- Battery charging
Battery fully charged, Battery partially charged, and Battery discharged symbols will only be shown when unit is
operating without being connected to AC.
Conguring FlexScan to Auto-Off
The Auto-Off feature is available for conserving battery power on your FlexScan.
To Congure the Auto-Off Timer:
• Turn your FlexScan On.
• From the displayed Home screen, press Home/Menu button to display General Settings menu.
• In the Settings menu, locate the Auto Off Timer option.
• Touch the Auto Off Timer eld to display the settings sub-menu.
• Select the desired power save option (Never, 5 min, 15 min).