User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Labeling and Hazard Warning
- Hardware Overview
- User Interface Overview
- FleXpress® Fault Locate Test Setup
- General Settings
- Live Fiber Detection and Launch Quality Check
- Live PON Test
- LinkMap Display and Navigation
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Probe and FlexScan
- File Manager
- Transferring Results to a PC via USB
- Back Up Saved Results to USB Memory
- How to View Device Information
- General Information
4
working with optical systems.
• NOTICE: Except user replaceable battery, FlexScan contains no user-serviceable parts, it must be returned to AFL
or authorized agents for repair and calibration.
• IMPORTANT: Proper care in handling should be taken when using any precision optical test equipment.
Scratched or contaminated optical connectors can impact the performance of the instrument. It is important to
keep the dust caps in place when the unit is not being used.
• IMPORTANT: Always clean OTS/OLS/OPM port and any mating connectors using approved cleaning supplies (e.g.
One-click cleaner) before mating the connectors.
• CAUTION! Power levels in excess of +10 dBm may damage OTS/OLS/OPM optics. Do not connect FlexScan to
network connectors where received power level may exceed +10 dBm. If high power levels are suspected, verify
power level by connecting to OPM and measuring received power level.
Apple Inc. Legal Notice
AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are trademarks of Apple Inc., registered
in the U.S. and other countries. iPad Air, iPad mini, and Lightning are trademarks of Apple Inc.