User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Labeling and Hazard Warning
- Hardware Overview
- User Interface Overview
- FleXpress® Fault Locate Test Setup
- General Settings
- Live Fiber Detection and Launch Quality Check
- Live PON Test
- LinkMap Display and Navigation
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Probe and FlexScan
- File Manager
- Transferring Results to a PC via USB
- Back Up Saved Results to USB Memory
- How to View Device Information
- General Information
20
Pairing FlexScan with FOCIS Flex Inspection Probe
To transfer ber-end images from the FOCIS Flex inspection probe and display inspection results on FlexScan, you
must Bluetooth pair your FOCIS Flex probe with FlexScan.
Enable Bluetooth on FlexScan
• From the Home screen, touch General Settings.
• In the General Settings screen, touch Bluetooth.
• Touch the Bluetooth On/Off control to enable.
Enable Bluetooth on FOCIS Flex
• From FOCIS probe Main Menu, select Settings, then press Select.
• From the displayed Settings Menu, select Bluetooth, then press Select.
• Highlight Pair with New Device, then press Select.
• When a list of devices is displayed, navigate to and select Bluetooth ID of the FlexScan device, and then press
Select to Set as Default Device.
• Conrm Code displayed on FOCIS Flex by selecting Yes
• Conrm Code displayed on FlexScan by touching Done.