User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Labeling and Hazard Warning
- Hardware Overview
- User Interface Overview
- FleXpress® Fault Locate Test Setup
- General Settings
- Live Fiber Detection and Launch Quality Check
- Live PON Test
- LinkMap Display and Navigation
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Probe and FlexScan
- File Manager
- Transferring Results to a PC via USB
- Back Up Saved Results to USB Memory
- How to View Device Information
- General Information
19
Inspecting Fibers with FOCIS Probe and FlexScan
Optical connectors may be inspected using FOCIS Flex, FOCIS Duel, or FOCIS Lightning auto-focusing connector
inspection probe with IEC pass/fail analysis. Captured ber end-face images and pass/fail results are immediately
displayed on the FOCIS probe display and on the paired FlexScan and may be saved in either FOCIS or FlexScan. A
micro-USB port on either FOCIS or FlexScan supports fast upload of internally stored results to PC.
Notes:
• For detailed instructions on how to operate FOCIS Flex, FOCIS Duel, or FOCIS Lightning inspection probe, please
refer to the FOCIS Flex, FOCIS Duel, or FOCIS Lightning User’s Guide (available on www.AFLglobal.com).
• In this User’s Guide, FOCIS Flex model is used as example in the following sections, which describe Bluetooth
pairing and inspection process.
FOCIS Flex Inspection Probe Overview
Controls and Interfaces
1. Power button.
2. Image Capture button.
3. F1 soft key (typically Back function).
4. F2 soft key (typically Select function).
5. Navigation and Edit functional keys.
6. Image Display - 2-inch Color LCD (320 x 240)
7. F1 and F2 soft key labels area.
8. Optical inspection port.
9. Adapter tip.
10. Micro-USB port.
11. 5 VDC input jack.
12. Charging indicator.
2
1
9
8
3
4
7
5
6
12
11
10