User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Labeling and Hazard Warning
- Hardware Overview
- User Interface Overview
- FleXpress® Fault Locate Test Setup
- General Settings
- Live Fiber Detection and Launch Quality Check
- Live PON Test
- LinkMap Display and Navigation
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Probe and FlexScan
- File Manager
- Transferring Results to a PC via USB
- Back Up Saved Results to USB Memory
- How to View Device Information
- General Information
14
While in the General Settings screen, select and view or edit settings as follows:
Language: touch to select from available languages (depends on installed language pack).
Distance Units: select
– kilometers
– meters
– kilofeet
– feet
– miles
Date & Time: touch to adjust current date or time
• Enable / Disable 24 hour format.
• Touch current Date & Time to edit.
– From the displayed sub-menu, touch the desired Time/Date parameter to enable it: hours, minutes, AM/PM (if
24-hour format disabled), year, month, day.
– Use [-] / [+] controls to change (increment or decrement) the selected parameter value.
– Touch Done to save changes and return to the General Settings screen.
– Touch Cancel or Back to return to Settings menu without saving edits.
General Settings
General Settings screen is accessed from the Test Results Screen, by pressing Home/Menu button and then
selecting General Settings.
While in the General Settings screen:
• Touch the desired setting eld (e.g. Language) to display a sub-menu.
• Touch Left / Right Arrows to display additional General Settings screen.
• Touch Back to return to the previous menu.