User's Guide

13
Fiber Type
Fiber Type settings depends on the selected Network Type option. Touch the Fiber Type eld to display one of the
following:
• Single-mode G.65x
• User-SMF options
Viewing and Conguring Fiber Type
G.65x Fiber Settings may be viewed but NOT changed.
User Settings may be viewed and changed.
To view G.65x Fiber Settings
• While in the Setup screen, make sure G.65x ber type is displayed in the Fiber Type eld.
• If not, touch the Fiber Type eld to display the Fiber Type menu and touch the desired G.65x ber types to
select.
• When back in the Setup screen, touch and hold the displayed G.65x ber type to open and view the default
settings as follows:
– Group Index of Refraction (GIR)
– Backscatter Coefcient (BC)
– Fiber Attenuation (ACI; Loss-per-Distance)
• Touch Back to return to the Setup screen.
To view and edit User Fiber Type Settings
• While in the Setup screen, make sure the User Fiber Type label is displayed in the Fiber Type eld.
• If not, touch the Fiber Type eld to display the Fiber Type menu and touch the User option to select.
• When back in the Setup screen, touch and hold the displayed User label to open the User Fiber Type settings
screen and congure settings as follows:
– Group Index of Refraction (GIR)
– Backscatter Coefcient (BC)
– Fiber Attenuation (ACI; Loss-per-Distance)
• Touch the desired parameter eld (e.g. GIR @1310 nm) to display its Editor screen.
• Edit the value using on-screen controls. Touch Done to save changes and return to the User Fiber Type settings
screen.
• Touch Back to return to the Setup screen.