User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Labeling and Hazard Warning
- Hardware Overview
- User Interface Overview
- FleXpress® Fault Locate Test Setup
- General Settings
- Live Fiber Detection and Launch Quality Check
- Live PON Test
- LinkMap Display and Navigation
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Probe and FlexScan
- File Manager
- Transferring Results to a PC via USB
- Back Up Saved Results to USB Memory
- How to View Device Information
- General Information
12
Pass/Fail Rule
• Touch Pass/Fail Rule option to select ITU G.671, TIA-568.3-D, or User pass/fail rules.
• Touch and hold selected Pass/Fail rule to view/edit link and event pass/fail limits.
• Use left/right arrows to navigate through, view and edit pass/fail limits.
Notes:
1. Splice, Connector and Splitter pass/fail limits are xed and cannot be edited for ITU G.671 and TIA-568.3-D
standards.
2. Splitter pass/fail limits can only be viewed and set in TS100-70.