User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Labeling and Hazard Warning
- Hardware Overview
- User Interface Overview
- FleXpress® Fault Locate Test Setup
- General Settings
- Live Fiber Detection and Launch Quality Check
- Live PON Test
- LinkMap Display and Navigation
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Probe and FlexScan
- File Manager
- Transferring Results to a PC via USB
- Back Up Saved Results to USB Memory
- How to View Device Information
- General Information
10
Fault Locate Setup Screen Overview
1. Fault Locate Setup screen is accessed from the Test screen by touching the TS100 Tool icon.
2. When in Fault Locate Setup screen, select a Test Setting to edit it
– Network Type
– Launch Cord
– Pass/Fail Rules
– Fiber Type
3. Press Start/Stop to initiate a test and return to Home screen.
4. Press Home/Menu or touch Back to return to Home/Test Results screen without starting a new test.
5. Touch dB/dBm icon to select Light Source & Power Meter test screen.
6. Touch Inspection icon to select Connector Inspection display screen.
1
2
4
3
5
6
4