User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
8
Controls, Display, Interfaces
Hardware Overview
Ref Feature Description
1 Power button Press to power FlexScan OTDR on/off.
2
Power port (5 VDC)
This is interface for the AC power adapter/charger.
3 AC/Charger indicator Illuminates when AC is connected and indicates battery charging status.
• RED light = rechargeable battery is charging.
• GREEN light = rechargeable battery is fully charged.
• Note: Flashing RED/GREEN = Battery charging halted due to over-temperature.
4 USB host port This USB port allows connection to a PC for transferring stored test results; also may
be used to connect USB Flash Drive for data storage and copying Internal les.
5 Micro-USB function
port
With the supplied USB cable, this port may be used to connect OTDR to a USB host
port on a PC.
2
4
5
3
1