User's Guide

46
• Job
A
, OTDR End
B
, Far End
C
, and Cable
D
elds are user-dened and may be set and/or edited in
the String Editor screen:
– Touch the desired eld to display String Editor
E
.
– Make edits using on-screen controls.
– Touching Done will save edits and return to the
Save As screen.
– Touching Back or Cancel will return to the Save
As screen with no edits saved.
• Link number
F
auto-increments after each save,
but can be modied in the Number Editor screen as
needed.
– Touch the Link eld
F
to display the
Number Editor
G
.
– Make edits using on-screen controls.
– Touching Done will save edits and return to the
Save As screen.
– Touching Back or Cancel will return to the Save
As screen with no edits saved.
Saving, Recalling and Uploading Test Results
Save As Screen
Number Editor
G
String Editor
E
B
D
A
F
C
Touch Results to select Internal memory or USB (if
present) and navigate to the desired Job and Cable folder