User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
45
Saving, Recalling and Uploading Test Results
OTDR End
G
_Far End
H
_Cable
J
_Link
K
_Wavelength
Cable Name
D
Test results
A
may be stored in the FlexScan Internal memory
B
or on USB
C
. Saved test results are organized
into a Cable sub-folder
D
within a Job folder
E
.
Cables, Internal Results, Internal Results, USB
A name of the saved result consists of several parameters, which are dened in the Save As screen
F
.
Jobs, Internal
E
D
B C
A
Save As Screen
J
G
F
H
K
S13 for 1310 nm
S15 for 1550 nm
S16 for 1650 nm
Link Num ber
Touch Results to select
Internal memory or USB (if
present) and navigate to the
desired Job and Cable folder