User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
44
On FlexScan:
• If the Received Image option
A
is set to Popup Window
B
in
General Settings, inspection results received from FOCIS Flex will
be immediately displayed on FlexScan
D
screen even if Connector
Inspection mode
E
is not enabled.
• If the Received Image option
A
is set to Show in Tray
C
in General
Settings, inspection results will only be displayed when Connector
Inspection mode
E
is enabled.
• Once displayed, view image and results on FlexScan
D
.
• Inspection results can be stored in FOCIS Flex or FlexScan. To save
results in FlexScan, select Menu
F
, then Save As
G
.
Inspecting Optical Connectors
Home Screen Inspection Mode Screen
General Settings Screen
A
B C
F G
E D