User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
42
Enable Bluetooth on FOCIS Flex
1. From FOCIS Flex Main Menu, select Settings, then press Select.
2. From the displayed Settings Menu, select Bluetooth, then press Select.
3. Highlight Pair with New Device, then press Select.
4. When a list of devices is displayed, navigate to and select Bluetooth ID of the FlexScan device, and then press
Select to ‘Set as Default Device’.
1
2
3
4
1 2 3 4