User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
41
Enable Bluetooth on FlexScan
Pairing FlexScan with FOCIS Flex Inspection Probe
• From the Home screen, touch Settings
A
.
• In the General Settings screen: If Bluetooth is disabled
B
, touch its eld to display the Bluetooth screen.
• Touch the Bluetooth radio button to enable
C
.
• In the device name eld
D
you will see Bluetooth ID displayed for the FlexScan device.
Home Screen General Settings Screen Bluetooth Screen
A
B
C
D
To transfer ber-end images from the FOCIS Flex inspection probe and display inspection results on FlexScan, you
need to pair your FOCIS Flex probe with FlexScan.