User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
38
1. If used with non Wave ID source, touch to select wavelength. If used with Wave ID source, power meter
automatically synchronizes to and indicates received wavelength(s).
2. Hold to store new reference(s) at received wavelength(s). Touch Ref/Set to view stored reference(s).
3. Touch to toggle between power (dBm or nW) and loss (dB) mode.
Note: Power meter detects and indicates ber identifying tones when used with a light source capable of
generating a modulated Tone signal.
4
5
6
Power Meter Settings and Features
Light Source and Power Meter Operation
Light Source Settings
Power Meter Settings
4
5
6