User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
36
Understanding Trace Display Features
Vertical zoom: Touch the up/
down arrow to zoom trace
view vertically around the
currently active cursor
Horizontal zoom: Touch the
right/left arrow to zoom trace
view horizontally around the
currently active cursor
Touch the cursor select key
to enable and display the
‘cursors control’ mode
Touch the LinkMap icon to
display the LinkMap view
Receive cable (if present)
Launch cable (if present)
Loss between A and B cursor
Loss-per-distance between A
and B cursors
Maximum Reectance
between A and B cursor
Distance from A to B cursor
Fiber under test