User's Guide
Table Of Contents
- Safety Information
- Apple Inc. Legal Notice
- Hardware Overview
- User Interface Overview
- General Settings
- SmartAuto® OTDR with FleXpress™ and LinkMap® Display
- Testing in SmartAuto® OTDR
- Understanding Expert/Real-time OTDR Settings
- Expert OTDR Settings
- Real-Time OTDR Settings
- Testing in Expert and Real-Time OTDR Mode
- Light Source and Power Meter Operation
- Inspecting Fibers with FOCIS Flex and FlexScan
- Saving, Recalling and Uploading Test Results
- How to View Device Information
- General Information
30
Selection marker indicates
active icon: Summary, Event,
or Section
LinkMap tab: when in any
other test results viewer
(Event Table, Trace view,
Info view), touch to return to
LinkMap view
Touch to move to next or
previous event or link section
Event Table tab: touch to display measurements for the currently
selected Link Summary
A
, Event
B
, or Section
C
Trace tab - touch to display Trace view
that depends on active icon:
Icon Display View
Summary Trace of entire network
Event Trace around event
Section N/A
Link Summary icon: may be
green (all events passed), red
(one or more events failed,
but no major fault detected),
or black (one or more major
faults detected)
A
Info tab: touch to display
summary of OTDR settings
used for this test
Event icon: event icons may be green (pass), red
(fail), or black (major fault). Pass/fail/major fault
is based on event loss and reectance thresholds
congured by the currently selected Pass/Fail Rule.
B
C
Link Section between events
Details of the currently
selected Summary, Event,
or Section